Standard Description Notes ENstandardisharmo-nizedwithEUdirective 2006/95/EC Safetyrequirementsforelectrical equipmentformeasurement,control, andlaboratoryuse. Harvard University BufferPrep Kit eliminates the time-consuming manual buffer preparation and titration usually needed for every pH change in chromatography. For any pH and salt concentration entered, BufferPrep automatically calculates and prepares the composition of the buffer on-line, from four stock solutions. Linear and step salt gradients can be Introduction 1 ÄKTAFPLC System Manual 18-1140-45 Edition AE 7 1 Introduction 1.1 General ÄKTA™FPLC is a fully automated liquid chromatography system designed for research scale purification of proteins. The system simplifies the transition from laboratory to full scale production. Manual Flowpath A1 or A2 BufferValveA Manual Flowpath B1 or B2 BufferValveB Pump A Pump B Common inlet A2 A1 Common inlet B2 B1. PUMP P-900 Back - Wash Lines 20% Ethanol : Water Pump Back-Wash Lines Wash OUT Wash IN Buffer IN Buffer OUT High pressure Piston seal Ball outlet check valve Ball inlet check valve Piston ÄKTAprime plus User Manual 11-0026-44 Edition AA 9 1Introduction This section is an introduction to ÄKTAprime™ plus, the documentation included and the content in this manual. It also contains an overview of the safety instructions. 1.1 General ÄKTAprime plus is a compact liquid chromatography system designed for one- ii System Manual 18-1140-45 Edition AB About this manual This manual describes the operation of the ÄKTA ™FPLC system. System description, system maintenance and trouble-shooting are also found in this manual. The installation of the system is described in the separate Installation Guide. System description, system installation, maintenance and trouble- shooting The user must read and understand the Safety Instructions in this manual. .. manual, and periodic maintenance schedules specified in Product Maintenance 22 Oct 2012 Using the Akta Prime plus. The AKTA Purifier 100 is perfect for application spanning a wide range of wavelengths. The AKTA Purifier 100 allows for rate flows of up to 100 ml per minute. Fast and easy start to purification work. - pre-programmed application protocols and method templates. Speed and reliability for every run- fast optimization and peak identification ÄKTA Purifier - FPLC System System pre-start checks 1 Check if there is any solution in the He tubing.ALWAYS keep the He inlet above the solution or close the valve. 2 If there is any solution present, blow out the solution using the He and wash the bottle. 3 Calibrate the pH meter everyday. 4 Confirm that there is enough solution for the back flush system. Your equipment should rely on ATG. Analytical Technologies Group specializes in the maintenance and repair of AKTA™ FPLC instruments, including the AKTA™ Basic, AKTA™ Purifier, and AKTA™ Explorer models. We are highly specialized, only servicing a very limited number of instrument lines, so our engineers know these systems every bit as