Point Gas Monitor Technical Manual Introduction 1 Introduction E3Point derives its name from: E nergy Management, E fficiency, and E conomic value in gas detection. E 3 Point is an important part of toxic or combustible gas detection system that combines a gas sensor (electrochemical or catalytic type), a control unit, and a set Carbon monoxide Detector Air Quality Sensors Carbon monoxide Detector The E703H are Carbon monoxide detector that are designed for Minigas. These detectors are equipped with an electrochemical cell head which measures the concentration of toxic gas on the scale of ppm. Overview Specifications Resources SKU Reduce your risk of home fires with the PROSiXCOMBO Two-Way Wireless Smoke/Heat/CO Detector. With the "One-Go-All-Go" feature, if one sensor detects smoke, heat or carbon monoxide, and begins to sound, all sensors in the system will sound. The PROSiXCOMBO detector also gives audible instructions that can support multiple languages. Use the detector only as specified in this manual, otherwise the protection provided by the detector may be impaired. • Only the instrument capable of sounding the alarms and showing readings on a display should be used for immediate safety critical use. Wireless communication and infrastructure are only for informational monitoring. CO ALARM CONDITION: The display backlight flashes, the display identifies the source of the alarm, the alarm signals are sounding and the panel sounding device is pulsing. FOLLOW PROPER EMERGENCY PROCEDURES TO NOTIFY THE FIRE DEPT., EVACUATE THE BUILDING, ETC. To acknowledge the alarm condition: 1. Press the "ALARM ACKNOWLEDGE" on the E3 panel. CK300-CO: CO Color Kit (includes cover and trim ring), white CK300-CO-IV: CO Color Kit (includes cover and trim ring), ivory CK300-CO-BL: CO Color Kit (includes cover and trim ring), black RA100Z: Remote LED annunciator, UL-listed RA100ZA: Remote LED annunciator, ULC-listed M02-04-00: Detector test magnet M02-09-00: Telescoping test magnet E3Point Owners Manual E3Point Network Users Manual E3Point Quick Start User Guide REMOTE CO SENSOR HONEYWELL LOGO. add to cart . 301-C. Honeywell Analytics. GAS DETECTION CONTROLLER Honeywell Analytics. H2 SINGLE GAS DETECTOR WALL MOUNT. add to cart . GDD-CO-1. Honeywell Analytics. CO GAS DETECTOR DUAL SENSING. add to cart . E3SCO Works through BAS to improve fault diagnostics and collect data on gas concentration levels, sensor condition, etc. Couple with 301C to log data and daisy-chain up to 96 E3Point units Advanced Sensing Technology: Detects CO, NO2, O2, H2, H2S, CH4, C3H8 The detector is a personal safety device. It is your responsibility to respond properly to the alarm. Important: Please note that this is not a remote sampling device by default. Table 1. lists the gases monitored. Zeroing the Sensors To zero the sensors, refer to steps #1-3 in Connecting to the IR Link. Table 1. Gases Monitored Saturday and Sunday: 9am - 5:30pm CDT. Online Order Support and Customer Service. 1-800-664-2751. Open Hours: All day (24 hours), Monday through Sunday. Professional Contractor Support. Call the Homeowner number above and select the 'Contractor' option. Open Hours: Monday through Friday: 9am - 5:30pm CDT. Figure 1. 5800CO Wireless Carbon Monoxide Detector PROGRAMMING The detector must be enrolled in the control panel before it can operate in the system. Alarms and trouble conditions from the detector are reported on one protection zone, which is