For 5 or more axes, use of YC-Link/E makes it possible to connect up to four RCX340 controllers so as to perform the centralized control of multiple robots. Additionally, when using YC-Link/E Note 1, multiple robots can be handled as if they are operated using one controller. This ensures very easy robot programming and management. AHMC340L-3 Eaton manual motor controller, #14-4 AWG, 40A, Panel, 600V, Side wired box lug, Maintained contact, NEMA 3R, Enclosure: Copperless aluminum, Three-pole, Three-phase, Toggle switch, Copper-alloy terminal, Single-throw, Glass-filled nylon Contact me about this product Need product support? Contact Information Customer Service Type P1 and P3 switches are 2-position (ON-OFF), 90° rotary operated 3-phase manual motor controllers and disconnect switches, rated from 20A up to 100A. They are all HP rated and ideally suited as motor disconnect switches. A side mounted auxiliary contact module operates as a late-make and early-break in relation to the main contacts to execute a load shedding task which is often required RCX340 Programming Manual. Introduction Our sincere thanks for your purchase of this YAMAHA RCX340 robot controller. This manual describes robot program commands and related information for using YAMAHA RCX340 robot controllers. Be sure to read this manual carefully as well as related manuals and 58 MOTOR Controls the motor power status. 7-90 AHMC340C - Eaton manual motor controller, Switch only, #14-8 AWG, 40A, Industrial, Panel, 600V, Side wired, Maintained contact, Black, Open, Three-pole, Three-phase