Solution. Solution. By changing the shutter speed or aperture automatically, the camera brackets the exposure up to ±3 stops in 1/3-stop increments for three consecutive shots. This is called AEB. *AEB stands for Auto Exposure Bracketing. 1. Turn on the camera. Set the camera's power switch to . 2. To perform exposure and/or flash bracketing: Choose the number of shots. Hold the BKT button and rotate the main command dial to choose the number of shots in the bracketing sequence. At settings other than [ 0F ], a bracketing icon and indicator will appear in the shooting display and control panel. Sony and the Environment How we're reducing our eco-footprint through energy efficiency and recycling initiatives.; Sony Pictures The hub for your favourite movies and TV shows.; Sony Music Classic artists to today's stars, local and global. For exposure bracketing, the settings control the amount of exposure shift between frames. The settings are based on Exposure Compensation values. For example, if you choose 0.7 for an autoexposure bracketing set, the camera makes three exposures: one with exposure values as metered by the camera, one exposure with EV +0.7, and one exposure with EV -0.7 Your choices are from 0.3 EV to 2.0 EV. Each time the shutter button is pressed, the camera takes multiple shots at different exposures and combines them into a single high-dynamic-range image, reducing loss of detail in highlights and shadows. Choose the amount the camera varies exposure from AUTO, 1.0 EV, 1.5 EV, 2.0 EV, 2.5 EV, and 3.0 EV. Angled front view of the NEX-5R with the SEL 18-55mm f/3.5-5.6 kit lens. (Source: Sony.) the Incandescent adding a strong blue bias, while the Fluorescent preset shifted colours towards cyan. Manual measurement provided neutral colour rendition. Exposure bracketing: 3 continuous exposures, in 0.3, 0.5 or 0.7EV steps Photography #Nikon #Exposure #Bracketing #auto #Exposure #Guide Exposure bracketing setup. How to on a D5600 (probably also relevant for D5500 and … -- ADVERTISEMENT --