1Engineering station: requirements include hardware and operating system (for additional information, see Readme on the TIA Portal Installation DVDs) 2SIMATIC STEP 7 Professional software in TIA Portal - as of V13 3SIMATIC S7-300 controller, e.g. CPU 314C-2 PN/DP - Firmware as of V3.3 with MMC memory card and safety hardware. The configuration of the system is easy and straight forward with either a simple function block logic program, or the award winning safety life-cycle tool SIMATIC Safety Matrix, which provides an intuitive cause and effect environment. SIMATIC SIS Compact can be used for safety applications up to SIL 3, as per IEC 61 508. Constantly new functions for meeting the highest demands. SIMATIC controllers offer more than just powerful hardware for controlling all types of machines and plants. The capabilities of SIMATIC controllers are constantly being expanded with new functions. In addition, they are a core element for vertical OT/IT integration with IT mechanisms. 3 SIMATIC S7-300 Getting Started for First Time Users Getting Started, 04/2007, 6ZB5310-0NC02-0BA0 Welcome to the "S7-300 Getting Started for First Time Users". • Hardware configuration and parameterization of the SIMATIC S7 modules, a PROFINET IO system (ET-200), a Touch Panel • Program Cycle, Process Image and Process Image Partition • Explanation and using different organization blocks • Deeper understanding of contents through practical exercises on the SIMATIC S7-1500 system model SCE_EN_011-102 Hardware Configuration S7-1200 CPU1215C_R1807.docx Signal modules (SM) for digital and analog inputs and outputs. (A maximum of 2 SMs can be used for CPUs 1212C and 8 SMs for 1215C.) Communication modules (CM) for serial communication RS232/RS485. (Up to 3 CMs can be used for CPUs 1211C/1212C and 1215C.) Configuring Siemens S7-300 PLC with Moxa MGate 4101-MB-PBS 2. Ethernet Connection • Connect CPU 315 to the PC running SIMATIC Step7 through an Ethernet connection to one of the two Ethernet connectors, either directly or through a common Ethernet switch. • Connect the PROFIBUS cable from th e PROFIBUS port on CPU 315 to the PROFIBUS port on Configuration HSP 1. Add new device 2. Configure device Add device with hardware catalog Add device via available participants 3. Create user administration With Web Based Management With security settings 4. Configure device 5. Mode Standalone PN IO device 6. Load SCALANCE Standalone PN IO device 7. Perform online/offline comparison 8. Siemens S7 PLC and FC 300 Profibus Configuring the Profibus network Start the SIMATIC Manager and create a new project. Open Hardware configuration in S7 Manager to configure the system. In order to configure a PROFIBUS system, the configuration tool needs a GSD file for each type of slave on the network. The GSD file is a PROFIBUS DP "standard S7-1200 Programmable controller System Manual, 05/2009, A5E02486680-01 3. Preface. Purpose of the manual The S7-1200 series is a line of programmable logic controllers (PLCs) that can control a variety of automation applications. Compact design, low cost, and a powerful instruction set make the S7-1200 a perfect solution for controlling a wide S7-400 - Hardware and Installation Preface, Contents Product Overview 1 Installing the S7-400 2 Addressing the S7-400 3 Wiring the S7-400 4 Networking 5 Commissioning 6 Maintenance 7 Appendices Assembling and Installing Systems A Guideline