A. Safety Guidelines. This manual contains notices which you should observe to ensure your own personal safety as well as to avoid property damage. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring to property damage only have no safety alert symbol. Danger. Proper use of Siemens products Note the following: Table 1 Scope of the manual CPU Convention: CPU designations: Order number As of firmware version CPU 312C 6ES7312-5BE03-0AB0 V2.6 CPU 313C 6ES7313-5BF03-0AB0 V2.6 CPU 313C-2 PtP 6ES7313-6BF03-0AB0 V2.6 CPU 313C-2 DP 6ES7313-6CF03-0AB0 V2.6 CPU 314C-2 PtP 6ES7314-6BG03-0AB0 V2.6 Contents Purpose of this Manual 1 Guide to the S7-300 Documentation 2 Structure and Communication Functions 3 Memory Concept 4 Cycle and Response Times 5 Technical Data 6 Technical Data for Integrated Page 13 Automation and Drives - SCE 3. The project is now assigned the name 'CPU314C_2DP' under 'Name' ( → CPU314C_2DP Page 14 Automation and Drives - SCE 5. Open the configuration tool by double-clicking on 'Hardware'. (→ Hardware) 6. Open the Page 15 Automation and Drives - SCE 7. Now Started Siemens Plc S7-300 , Cpu 313c Tutorial in English. This video introduction about 1P 6ES7 313-5BF03-0AB0.as soon as join Automation Spot Channel t Preface SIMATIC S7-300 CPU 31xC and CPU 31x, Technical data Manual This manual is part of the documentation package with the order number: 6ES7398-8FA10-8BA0 Edition 08/2004 A5E00105475-05 Guide to the S7-300 documentation 1 Operating and display elements 2 Communication 3 Memory concept 4 Cycle and reaction times 5 Technical data of CPU 31xC 6 Technical data of CPU 31x 7 Appendix A Safety 1.1.2 C7-613. C7-613 C7-613 C7-613. C7-613 C7-613. C7-613 HMI C7-613 RUN C7-613. HMI. STOP HMI. HMI STOP CPU in STOP mode! CPU STOP STOP CPU STOP. HMI. C7-613 STEP CPU 31xC and CPU 31x: Technical specifications 6 Manual, 03/, A5E CPU C C C-2 DP C-2 PtP C-2 DP C-2 PtP DP DP Increase Main memory X 1 X X X X X 1 X X X 1 X Performance through shorter command processing times X 1 X X X X X 1 X X X 1 X Status information that can be monitored by the. PLC siemens S wiring diagram of i/o modules.