schneider lexium 32 error codes
lexium 32 catalogschneider servo drive parameter setting
schneider servo drive manual pdf
schneider lxm32md18n4 error codes
schneider servo drive fault codes pdf
schneider lxm23du07m3x user manual pdf
schneider servo drive alarm list

This manual is valid for LXM23D servo drives and corresponding BCH motors. 6. AC servo drive. 1.5 Type code. Lexium 23 Plus drive commercial reference. Neither Schneider Electric nor any of its affiliates or subsidiaries shall be responsible CN6. Analog and digital I/O, relay outputs (see page 104) Failure to use Schneider Electric software or approved software with CN1 I/O. CN3 M odbus. CN4 CAN. CN8 M oto r. CN7. CN5 220V. CN6 DC-bus.Connection Digital Inputs and Outputs (CN6) . Ground cable shields for all fast I/O, analog I/O, and communication signals at a single point. 1). Carefully read this manual and observe all instructions. Connecting the digital inputs/outputs (CN6) . local Schneider Electric representative. The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained Contact your local Schneider Electric representative if the DC bus CN6 I/O. Figure 29: Wiring diagram, digital inputs/outputs. Signal. Meaning. I/O. This manual describes technical characteristics, installation, commissioning, operation, and maintenance of the servo drive Lexium 32M (LXM32M).